Sony DVS-9000 User Manual page 131

4
5
6
7
130
DME Special Effect Operations
Knob Parameter Adjustment
1 Mode Degree of motion detection
In the <Key Field/Frame Mode> group, select the interpolation method for
the key signal.
Adaptive: Detect changes in the luminance component of the key signal
separately, and switch automatically between fields and frames.
Field: Do interpolation in field units. This gives natural movement,
suitable for moving video.
Frame: Do interpolation in frame units. This gives higher image precision,
suitable for still pictures.
When you select Adaptive in step 4, set the following parameter.
Knob Parameter Adjustment
1 Mode Degree of motion detection
In the <Interpolation Mode> group, set the number of pixels to use in
interpolation.
Multi: Use multi-point interpolation. This gives higher picture quality.
Linear: Use two-point interpolation.
Note
When using the BKDS-9470, Multi is always selected.
In the <Filter Mode> group, select the method used to show the picture
reduced or expanded.
Mode1 (standard): Even when the picture is reduced, add compensation
so that it can be seen clearly.
Mode2 (soft): Suppress aliasing when expanding or reducing the picture.
Mode3 (sharp): Do not surpress aliasing when expanding or reducing the
picture.
Setting values
1 to 4
Setting values
1 to 4