Sony DVS-9000 User Manual page 314

Assigning the utility/shot box mode switching function
You can first assign functions to the key 2 row cross-point buttons, and then
use them in the same way as the buttons in the utility/shot box control block.
To switch this mode on and off, it is necessary to assign this function to the
cross-point control block [PRE MCRO] button.
For details of how to assign a function to this button, see "Assigning a function
to the key 2 row cross-point buttons" (page 345).
1
In the Panel >Config menu, press [Link/Program Button].
The Link/Program Button menu appears.
2
Press [Xpt Module].
The Xpt Module menu appears..
3
Select the setting target (M/E-1 to M/E-3 or P/P) in the status area.
4
Select [Utility/Shotbox] in the <PRE MCRO/POST MCRO> group.
This assigns the utility/shot box mode to the [PRE MCRO] button, and
disables the [POST MCRO] button.
Assigning the function to disable cross-point button operations
to a button
1
In the Panel >Config menu, press [Link/Program Button].
The Link/Program Button menu appears.
2
Press [Xpt Module].
The Xpt Module menu appears.
3
Using any of the following methods, select the bank.
• Press directly on the list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
4
Press [Inhibit Set].
This assigns the function to disable cross-point button operations to the
[PRE MCRO] button.
Parameter Adjustment
Bank Bank selection
Setup Relating to Operations From the Control Panel
Setting values
1 to 4
313