Sony DVS-9000 User Manual page 412

The DCU >Serial Port Assign >P-Bus Setting menu appears.
At the top of the status area, the relevant serial port, slot number, protocol,
serial port name, and SCU number appear. In the lower part of the status
area, the device name and response speed settings appear.
4
Using any of the following methods, select the ID for which you want to
make a device name setting.
• Press directly on the device name list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 ID
5
In the <Name> group, press [Set] to display a numeric keypad window.
6
Input the desired name, and press [Enter].
The input device name appears in the device name list.
To return the device name for the selected ID to the default name
In the <Name> group, press [Clear].
7
Using any of the following methods, specify the command to which the
response speed setting applies.
• Press directly on the delay list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
2 No
8
Turn the knob to set the response speed (in field units) of the device.
Knob Parameter
3 Delay
9
Press [Delay Set].
This confirms the setting.
10
Repeat steps 4 to 9 as required to make the settings for other commands.
Adjustment
ID selection
Adjustment
Command number selection
Adjustment
Response speed setting
Setting values
0 to 23
Setting values
1 to 18
Setting values
0 to 60
411
Setup Relating to DCU