Sony DVS-9000 User Manual page 63

Applying the Sketch effect
1
2
3
4
62
DME Special Effect Operations
In the DME menu, select VF7 'Enhanced Video Modify' and HF1
'Sketch.'
The Sketch menu appears.
Press [Sketch], turning it on.
The Sketch effect is enabled.
Select the method for applying outlines in the <Sketch Mode> group.
Sketch: Apply an effect like a sketch.
Edge Color: Enhance the outlines.
Draw: Apply an effect like a line drawing.
Relief: Apply a bas-relief effect.
Sharp: Increase the apparent sharpness.
Set the following parameters, according to the method selected in step 3.
• When Sketch is selected
Knob Parameter Adjustment
1 Mix Mix amount for Sketch video and
input video
2 Clip Reference level for outline
extraction
3 Gain Image gain for outline extraction
4 C Gain Chroma gain of input video
a) 100.00 gives an image completely transformed by the Sketch effect. 0.00 is the original
input image.
b) The larger the Clip value, the narrower the outline width.
• When Edge Color is selected
Knob Parameter Adjustment
1 Mix Mix amount for Edge Color video
and input video
2 Clip Reference level for outline
extraction
a) 100.00 gives an image completely transformed by the Sketch effect. 0.00 is the original
input image.
b) The larger the Clip value, the narrower the outline width.
Setting values
a)
0.00 to 100.00
b)
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
Setting values
a)
0.00 to 100.00
b)
–100.00 to +100.00