Sony DVS-9000 User Manual page 425

3
4
5
6
Modifying tally generation
1
2
3
Deleting tally generation settings
1
2
424
Setup Relating to Router Interface and Tally
In the <Tally Enable> group, specify the tally generation mode.
Enable: Always generate a tally.
Disable: Never generate a tally.
Tally Input: Generate a tally from the tally input state.
When you selected Tally Input as the tally generation mode in step 3,
select either of the following in the <Tally Input> group.
DCU1: Generate tally with reference to signal input to DCU1 port. Set the
port number with the knob.
DCU2: Generate tally with reference to signal input to DCU2 port. Set the
port number with the knob.
Turn the knob to select the tally input port number.
Knob Parameter Adjustment
5 Input No Tally input port number
Press [Execute].
This sets the settings made in steps 2 to 5 as the settings for tally
generation.
In the Router/Tally >Tally Enable menu, press [Modify].
The Modify menu appears.
With reference to steps 2 to 5 in the preceding section "Making new tally
generation settings," change the parameters as required.
Press [Execute].
This modifies the tally generation settings.
Using either of the following methods in the Router/Tally >Tally Enable
menu, select the tally generation entry you want to delete.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
Press [Delete].
Setting values
1 to 102