Signal Output Settings (Output Menu) - Sony DVS-9000 User Manual

Knob
5
To set the parameter settings to their defaults, press [Unity].
Enabling the illegal color limiter
To enable the illegal color limiter for the signals generated by the switcher
internal matte generator, press [Matte Illeg Col Limit] in the Switcher >Input
menu, turning it on.

Signal Output Settings (Output Menu)

For setup relating to signal outputs, use the Switcher >Output menu.
To display the Output menu
In the Engineering Setup menu, select VF3 'Switcher' and HF3 'Output.'
The status area shows the output signal numbers and names, and output signal
phase for the signals output from Output 1 to 48.
Assigning output signals
To assign a signal to output from an output port, use the following procedure.
1
In the Switcher >Output menu, press [Output Assign].
The Output Assign menu appears.
The status area shows the output ports and assigned signals on the left, and
a list of signals that can be assigned on the right.
2
In the <Output Assign> group, select either of the following.
[Re-Entry Source]: It is possible to make duplicate assignments.
M/E-1 Output 1 to 6
M/E-2 Output 1 to 6
M/E-3 Output 1 to 6
PGM/PST 1 to 6
DME Monitor Video
DME Monitor Key
Color Corrector 1 and 2
Undefined
Color Bkgd 2
Frame Memory 1 to 8
a) M/E output signals selected in the M/E Output Assign menu.
Parameter Adjustment
Black Level Black level
a)
a)
a)
a)
Setting values
–7.31 to +109.59
Setup Relating to Switcher Processor
367