Sony DVS-9000 User Manual page 379

3
4
5
6
7
8
To delete a link
Select the link you want to delete, then press [Clear] in the Switcher >Link
>Internal Bus Link menu.
378
Setup Relating to Switcher Processor
Press [Link Bus Select].
The Link Bus Select menu appears.
The status area lists the current setting status of the selected link and the
buses that can be selected.
In the <Bus Select> group, select [Master Bus] (link source bus).
Using any of the following methods, select the bus to be the link source,
and press [Bus Set].
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
2 No
a) Only when [Master Bus] is selected, M/E-1 to M/E-3 Trans PGM, and P/P Trans PGM are
available.
Only when [Linked Bus] is selected, AUX 1 to AUX 48 as Key and MON 1 to MON 8 as
Key are available.
Note
With one of M/E-1 to M/E-3 Trans PGM and P/P Trans PGM selected
for [Master Bus], linking is carried out as soon as you start moving the
fader lever.
In the <Bus Select> group, select [Linked Bus] (link destination bus).
Referring to step 5, select the bus to be the link destination, and press [Bus
Set].
Turn the knob to select the link table, and press [Link Table Set].
Knob Parameter
3 Link Table No
For more information about link tables, see the following item.
The status area reflects the current setting status.
Adjustment
Bus selection
Adjustment
Link table selection
Setting values
a)
1 to 190
Setting values
1 to 8