Sony DVS-9000 User Manual page 329

2
3
Exporting source names and destination names
To send the source names and destination names to the S-Bus, use the
following procedure.
1
2
3
4
328
Setup Relating to Operations From the Control Panel
Knob Parameter
2 Num
Using any of the following methods, select the table.
• Press directly on the list on the right of the status area.
• Press the arrow keys on the list on the right to scroll the reverse video
cursor.
• Turn the knob.
Knob Parameter
3 Table No
Press [Table Assign Set].
This sets the table for the selected switcher bank or bus.
In the Panel >XPT Assign menu, press [Name Export].
The Name Export menu appears.
Turn the knob to set the station ID.
Knob Parameter Adjustment
1 Station ID Station ID setting
a) If set to 255, the information is sent to all stations (with display of "All").
Press [Src Name Export].
This exports the source names to the station selected in step 2.
Press [Dest Name Export].
This exports the destination names to the station selected in step 2.
Note
Since destination names cannot be selected freely, fixed names are used.
Adjustment Setting values
Number of 1 and upwards
selected switcher
banks or buses
Adjustment Values
Selection of table 1 to 15
to be assigned
Setting values
1 to 255
a)