Sony DVS-9000 User Manual page 123

To invert the lighted area
Press [Light Invert], turning it on.
The lighted area is inverted.
To add color to the light source
1
2
3
4
122
DME Special Effect Operations
Knob Parameter Adjustment
3 Speed Rotation speed and direction
a) –100.00 is four rotations per second in the counterclockwise direction, and +100.00 is four
rotations per second in the clockwise direction. 0.00 stops the rotation.
In the Light 1 menu, press [Light Color Adjust].
The Light Color Adjust menu appears.
In the <Fill Blending Mode> group, select how the light and image should
be blended.
Mix: Light as if reflected from a mirror.
Multiply: Light as if reflected from a dull surface (diffuse reflection).
If you selected Mix, select the fill color in the <Fill Source> group.
Flat Color: A monochrome matte.
Hue Rotation: Color matte with a color that gradually varies.
According to the selection, set the following parameters.
• When you selected Flat Color
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
4 Brilliancy Brilliance of surface struck by light 0.00 to 100.00
a) 100.00: The image beneath the light shines through.
• When you selected Hue Rotation
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Speed Speed at which hue changes
4 Brilliancy Brilliance of surface struck by light 0.00 to 100.00
Setting values
a)
–100.00 to +100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
a)
Setting values
0.00 to 100.00
0.00 to 100.00
a)
–12.00 to +12.00
b)