Sony DVS-9000 User Manual page 307

2
3
4
Linking the next transition selection buttons
To the transition links between keyers, you can add a link for the next transition
selection buttons in the transition control block. The effect of this additional
link is such that if for example, two keyers (Key 2 and Key 3) are linked with
the master keyer (Key 1), pressing the [KEY1] next transition selection button
also selects the [KEY2] and [KEY3] buttons.
1
2
306
Setup Relating to Operations From the Control Panel
The Link/Program Button menu appears.
In the <Link> group, press [Key Trans Link].
The Key Trans Link menu appears.
The status area shows the keyers for each M/E bank and the linked keyers.
Using any of the following methods, select the keyer to be the master.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
1 Master Key
The selected keyer appears in reverse video.
In the <Key Select> group, select the keyer to be linked to the transition of
the master.
Note
Linking does not apply to a transition carried out with the downstream key
control block.
Set the transition links between keyers.
For details of the operation, see the previous section, "Linking transitions
between keyers."
Press [Next Trans Link], turning it on.
The [KEY1], [KEY2], [KEY3], and [KEY4] next transition selection
buttons in the transition control block are now selected coupled to the
settings in the Key Trans Link menu for transition links between keyers.
Note
These settings apply to the whole Key Trans Link menu. It is not possible
to make separate settings for each master keyer.
Adjustment
Select keyer to be master
Setting values
1 to 16