Sony DVS-9000 User Manual page 31

4
5
30
DME Special Effect Operations
Knob Parameter Adjustment
2 V Simultaneously adjust width of top
and bottom edges
3 All Simultaneously adjust width of all
four edges
• 16:9 mode
Knob Parameter Adjustment
1 H Simultaneously adjust width of left
and right edges
2 V Simultaneously adjust width of top
and bottom edges
3 All Simultaneously adjust width of all
four edges
In the <Edge Mode> group, select the type of edge.
Light: effect of light striking the edge
Knob Parameter Adjustment
1 Top Adjust luminance of top edge
2 Left Adjust luminance of left edge
3 Right Adjust luminance of right edge
4 Bottom Adjust luminance of bottom edge
5 All Simultaneously adjust luminance of
all four edges
Color: colored edges. When this is selected, set the following parameters
in the <Color Adjust> group.
• To set the density
Knob Parameter Adjustment
1 Density Adjust the color density
• To set the colors for each edge (Top, Left, Right, Bottom, All)
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
a) For the All adjustment, the value for Left is shown.
To soften the inside of the edges and the boundaries between adjacent
edges, turn on [Edge Soft], and adjust the following parameters.
Setting values
0.00 to 3.00
Value of H shown
Setting values
0.00 to 4.00
0.00 to 2.25
Value of H shown
Setting values
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
Value of Left shown
Setting values
0.00 to 100.00
Setting values
a)
0.00 to 100.00
a)
0.00 to 100.00
a)
359.99 to 0.00