Sony DVS-9000 User Manual page 472

This assigns the Flexi Pad control block to macro operations.
The numeric display shows the previously selected bank number and the
last recalled register number.
2
Use any of the following operations to select the bank for recall.
To select bank 0: Press the [BANK0] button.
To select bank 1: Press the [BANK1] button.
To select any of banks 0 to 9: Press the [BANK SEL] button, changing
the memory recall section display as in the following figure; select a
number from 0 to 9.
Example:
The selected bank number appears in the numeric display.
Each button in the memory recall section shows the corresponding register
name and register status for the selected bank.
Note that in the Setup menu, you can select whether to display register
names or register numbers.
Lit orange: Register holding macro data
Lit yellow: Last recalled register
Off: Empty register
3
Press the button in the memory recall section showing the name of the
register to be recalled.
The button you pressed lights yellow, the macro register is recalled, and
the macro is executed.
During macro execution, the button you pressed remains yellow, but
flashes. When macro execution completes, it returns to permanently on.
The numeric display shows the bank name followed by the selected
register number.
Notes
• It is not possible to execute more than one macro at a time.
7 8
4 5
1 2
0
Macro Operations in the Standard Type Flexi Pad Control Block
9
6
3
471