Sony DVS-9000 User Manual page 337

To cancel an assignment
After selecting the relevant button, press [Clear].
To use the [PREFS 9] to [PREFS 16] settings
There are sixteen user preference buttons that can be set, [PREFS 1] to [PREFS
16], but there are only eight user preference buttons present in the menu control
block. By default these buttons are assigned to the [PREFS 1] to [PREFS 8]
settings. Therefore, to use the settings of [PREFS 9] to [PREFS 16], it is
necessary to access the Engineering Setup >Panel >Config >Link/Program
Button >Menu Panel menu, and assign these settings to buttons in the menu
control block.
List of utility commands and user preference button status
The following table shows the utility commands that can be assigned to user
preference buttons.
Command name
SWR Remote1 Enbl
|
SWR Remote4 Enbl
DME1 Editor Port Enbl DME1 editor port enabled/disabled
DME2 Editor Port Enbl DME2 editor port enabled/disabled
2nd System Enbl
ME1 PGM1 ST
|
ME1 PGM4 ST
ME1 PVW ST
ME1 Clean ST
ME1 K-PVW ST
ME2 PGM1 ST
|
ME2 PGM4 ST
ME2 PVW ST
ME2 Clean ST
ME2 K-PVW ST
ME3 PGM1 ST
|
ME3 PGM4 ST
ME3 PVW ST
ME3 Clean ST
336
Setup Relating to Operations From the Control Panel
a) Function
Switcher Remote 1 enabled/disabled
|
Switcher Remote 4 enabled/disabled
(Dual Simul Mode) Second system
enabled/disabled
M/E-1 PGM1 output safe title on/off
|
M/E-1 PGM4 output safe title on/off
M/E-1 preview output safe title on/off
M/E-1 clean output safe title on/off
M/E-1 key preview output safe title on/
off
M/E-2 PGM1 output safe title on/off
|
M/E-2 PGM4 output safe title on/off
M/E-2 preview output safe title on/off
M/E-2 clean output safe title on/off
M/E-2 key preview output safe title on/
off
M/E-3 PGM1 output safe title on/off
|
M/E-3 PGM4 output safe title on/off
M/E-3 preview output safe title on/off
M/E-3 clean output safe title on/off
Button status
Lit amber Off
Enabled Disabled
Enabled Disabled
Enabled Disabled
Enabled Disabled
On Off
On Off
On Off
On Off
On Off
On Off
On Off
On Off
On Off
On Off
On Off