Sony DVS-9000 User Manual page 265

5
6
7
8
9
10
To return to the state before saving the setting
In the <Store> group, press [Undo].
To execute the settings to check them
Press [Recall] to execute the shotbox.
264
Shotbox Register Creation
Using any of the following methods, select the desired region. You may
select more than one region.
• Press directly on the region display in the status area, turning it to reverse
video.
• Press [ALL] to select all regions.
• To select all switcher-related regions (M/E, P/P, User), press
[SWR ALL].
• To cancel a selection, press once more to return to the normal display.
In the <Assign> group, select the snapshot or effect to be allocated to the
region.
Snapshot: Allocate a snapshot register.
Effect: Allocate a keyframe effect.
• If the selected register is locked, a confirmation message appears asking
whether or not to cancel the operation. Press [OK] to return to the
previous menu display without carrying out the registration.
• If the operation is carried out, the region selected in step 5 is registered
on the master timeline, and the parameters are now valid.
Depending on the selection in step 6, set the parameters as follows.
• When a snapshot is selected
Knob Parameter Adjustment
3 Snapshot Snapshot register number
• When an effect is selected
Knob Parameter Adjustment
3 Effect Keyframe effect number
a) For the DME region, you can also set register numbers 101 to 199, 201 to 299, and 301 to
399.
To run the allocated effect as soon as it is recalled, press [Auto Run],
turning it on.
Repeat steps 5 to 8 as required.
In the <Store> group, press [Store] to save the setting.
Setting values
1 to 99
Setting values
a)
1 to 99