Key Density Settings; Key Source Selection - Sony DVS-9000SF User Manual

Key Density Settings

For the selected key, you can separately set the key density.
Setting the key density
Use the following procedure.
1
In the DME menu, select VF6 'Input/Output' and HF2 'Video/Key.'
The Video/Key menu appears.
2
Press [Key Density], turning it on.
This enables the key density function, and you can now use the knobs to
adjust the parameters.
3
Set the following parameter.
Knob
1

Key Source Selection

Select the key signals for use as the front and back of the image.
Selecting the key source signals
Use the following procedure.
Note
When the shaped video setting (see page 111) is on, it is not possible to select
the key source. It is fixed as "Ext Key" as listed in the following.
1
In the DME menu, select VF6 'Input/Output' and HF2 'Video/Key.'
The Video/Key menu appears.
2
In the <Front Key> group or <Back Key> group respectively, press one of
the following, turning it on.
Ext Key: use the key signal sent from the switcher as the key source.
Int Key: use the full-size DME internal key signal as the key source.
Parameter Adjustment
Key Density Key density
Setting values
0.00 to 100.00
DME Special Effect Operations
113