Electrical Fuses - Mercedes-Benz EQS 2021 Owner's Manual

404 Breakdown assistance
Press cover 1 at top 2 inwards and
#
remove.
Screw in the towing eye clockwise as far as it
#
will go and tighten.
Vehicles with a trailer hitch: vehicles with a
trailer hitch do not have a rear bracket for the
towing eye. Fasten the tow bar to the trailer
hitch.
Make sure that cover 1 engages in the
#
bumper when you remove the towing eye.
* NOTE Damage to the vehicle due to
incorrect use of the towing eye or trailer
hitch
When a towing eye or trailer hitch is used to
recover a vehicle, the vehicle may be dam‐
aged in the process.
Only use the towing eye or trailer hitch
#
to tow away or tow start the vehicle.
Do not use the towing eye or trailer
#
hitch to tow the vehicle during recovery.
Tow-starting the vehicle
If the drive system does not start, have the
#
vehicle transported to a qualified specialist
workshop, e.g. a Mercedes-Benz Service
Centre.
The drive system cannot be started by tow-
#
starting the vehicle. Do not perform any
attempts to tow-start the vehicle.

Electrical fuses

Notes on electrical fuses
& WARNING Risk of accident and injury
due to overloaded lines
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher
amperage, the electric line could be overloa‐
ded.
This could result in a fire.
Always replace faulty fuses with speci‐
#
fied new fuses containing the correct
amperage.
* NOTE Damage due to incorrect fuses
Electrical components or systems may be
damaged by incorrect fuses, or their func‐
tionality may be significantly impaired.
Only use fuses that have been approved
#
by Mercedes-Benz and which have the
correct fuse rating.