Mercedes-Benz EQS 2021 Owner's Manual page 404

Observe the notes on towing away
#
( page 399).
/
Connect the towing device to the towing eye
#
in order to load the vehicle.
% Vehicles with trailer hitch: you can also
attach the tow bar to the trailer hitch.
Switch on the power supply (
#
Shift the automatic transmission to position
#
i.
% The automatic transmission may be locked
in position j in the event of damage to the
electrics. To shift to i, provide the on-
board electrical system with power
( page 397).
/
* NOTE Possible damage to the vehicle
when loading or unloading
When loading or unloading, the vehicle must
be raised to transport level.
If the transport settings are not shown or the
Vehicle not ready for loading
played, the vehicle may not be loaded or
unloaded.
If required, raise the vehicle to trans‐
#
port level again.
A vehicle that cannot be raised to trans‐
#
port level may not be loaded or unloa‐
ded using a ramp. Consult a qualified
specialist workshop.
page 191).
/
& WARNING Risk of accident due to acti‐
vated transport level
When you use transport level, driving and
driving safety systems have only limited avail‐
message is dis‐
ability and the view from the vehicle is limi‐
ted.
Breakdown assistance 401
Driving safety is severely restricted and there
is a risk of an accident!
Do not use transport level in normal
#
road operation.
Only activate and use transport level
#
when not on public roads.
Ensure that no persons or obstacles are
#
located in the area surrounding the
vehicle.
Raising the vehicle to transport level
Press the G button for at least five sec‐
#
onds.
Immediately press and hold the a button
#
for at least one second.
The For transport level, switch vehicle on
message is displayed.
Switch on the vehicle ( page 192).
/
#
The transport settings are displayed.
Swipe downward to select
#
and press a.
The vehicle is raised and the
Do not drive on ramp message is displayed
Transport level
Vehicle rising...