Table of Contents
Advertisement
326 Breakdown assistance
Installing and removing the towing eye
To install the towing eye at the front: pull out
#
cover 1.
To install the rear towing eye: press the mark
#
on cover
1
inwards and remove.
Screw in the towing eye clockwise as far as it
#
will go and tighten.
After removing the towing eye, engage cover
#
1
in the bumper.
* NOTE Damage to the vehicle due to incor-
rect use of the towing eye or trailer hitch
When a towing eye or trailer hitch is used to
recover a vehicle, the vehicle may be damaged
in the process.
Only use the towing eye or trailer hitch to
#
tow away or tow start the vehicle.
Do not use the towing eye or trailer hitch
#
to tow the vehicle during recovery.
Tow-starting the vehicle
Vehicles with automatic transmission
* NOTE Damage to the automatic transmis-
sion due to tow starting
The automatic transmission may be damaged
in the process of tow starting vehicles with
automatic transmission.
Vehicles with automatic transmission
#
must not be tow started.
Vehicles with automatic transmissions must
#
not be tow-started.
Electrical fuses
Notes on electrical fuses
& WARNING Risk of accident and injury due
to overloaded lines
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher amper-
age, the electric line could be overloaded.
This could result in a fire.
Always replace faulty fuses with speci-
#
fied new fuses containing the correct
amperage.
Advertisement
Table of Contents
