Mercedes-Benz EQS 2021 Owner's Manual page 162

Switching the Intelligent Light System
on/off
Requirements:
The vehicle is switched on.
R
Multimedia system:
© Settings Lights
4 5 5
DIGITAL LIGHT
5
Activate or deactivate Dynamic dipped
#
Activating or deactivating enhanced assis‐
tance functions
% The availability of the functions is dependent
on the country.
Select Supporting projections.
#
Activate or deactivate the desired projection.
#
Adaptive Highbeam Assist
Adaptive Highbeam Assist function
& WARNING Risk of accident despite
Adaptive Highbeam Assist
Adaptive Highbeam Assist does not react to:
road users without lights, e.g. pedes‐
R
trians
beam.
road users with poor lighting, e.g. cyclists
R
road users whose lighting is obstructed,
R
e.g. by a barrier
On very rare occasions, Adaptive Highbeam
Assist may fail to recognise other road users
with their own lighting, or may recognise
them too late.
In these, or in similar situations, the auto‐
matic high beam will not be deactivated or
will be activated despite the presence of
other road users.
Always observe the road and traffic
#
conditions carefully and switch off the
high beam in good time.
Light and sight 159
Adaptive Highbeam Assist cannot take into
account road, weather or traffic conditions.
Detection may be restricted in the following
cases:
In poor visibility, e.g. fog, heavy rain or snow
R
If there is dirt on the sensors or the sensors
R
are obscured
Adaptive Highbeam Assist is only an aid. You are
responsible for adjusting the vehicle's lighting to
the prevailing light, visibility and traffic condi‐
tions.