Mercedes-Benz EQS 2021 Owner's Manual page 406

Unloading the vehicle
Make sure that the vehicle is raised to trans‐
#
port level before unloading (
Lowering the vehicle after unloading
Switch on the power supply.
#
Start the vehicle.
#
Swipe upward in the transport settings to
#
select Standard level and press a.
The vehicle is adjusted to the height of the
last active level and the Lowering vehicle
message is displayed.
After the vehicle has been lowered, press the
#
G button for at least two seconds.
The transport settings are closed.
Towing eye storage location
page 400).
/
Towing eye 1 is located under the boot floor.
Breakdown assistance 403
Fitting and removing the towing eye