Mercedes-Benz EQS 2021 Owner's Manual page 51

48
Occupant safety
Only buckle the seat belts as intended.
#
% Observe the notes on correctly fastening the
seat belt ( page 44) and stowage options
/
( page 128).
/
Information on fitting a child restraint sys‐
tem and on children travelling in the vehicle
can be found in the "Children in the vehicle"
section ( page 63).
/
Seat belt adjustment function
®
Vehicles with PRE-SAFE : after a front seat
belt has been fastened, the automatic seat belt
adjustment may apply a certain tightening force.
Do not hold the seat belt tightly while it is
adjusting.
You can activate and deactivate the seat belt
adjustment function using the multimedia sys‐
tem ( page 48).
/
Activating/deactivating seat belt adjustment
via the multimedia system
Multimedia system:
© Settings Vehicle
4 5 5
Occupant protection
5
Activate or deactivate Belt adjustment.
#
Releasing seat belts
Press the release button in the seat belt
#
buckle and guide the seat belt back with the
seat belt tongue.
Seat belt warning function for the driver and
front passenger
The ü seat belt warning lamp in the driver's
display is a reminder that all vehicle occupants
must wear their seat belts correctly.
In addition, a warning tone may sound.
As soon as the driver and front passenger fasten
their seat belts, the seat belt warning goes out.
Function of the rear seat belt status display
The rear seat belt status display is only available
for certain countries.
When the vehicle is switched on, the rear seat
belt status display informs you for a certain
amount of time which rear seat belt is not fas‐
tened.
The status of the rear seat belt can be recog‐
nised by the colour of the symbol in the driver's
display:
Grey: the seat belt tongue of a rear seat belt
R
is not engaged in the seat belt buckle of the
corresponding seat.