Table of Contents
Advertisement
Press the mark on cover
1
inwards and
#
remove.
Screw in the towing eye clockwise as far as it
#
will go and tighten.
After removing the towing eye, engage cover
#
1
in the bumper.
* NOTE Damage to the vehicle due to incor-
rect use of the towing eye or trailer hitch
When a towing eye or trailer hitch is used to
recover a vehicle, the vehicle may be damaged
in the process.
Only use the towing eye or trailer hitch to
#
tow away or tow start the vehicle.
Do not use the towing eye or trailer hitch
#
to tow the vehicle during recovery.
Tow-starting the vehicle
Vehicles with automatic transmission
* NOTE Damage to the automatic transmis-
sion due to tow starting
The automatic transmission may be damaged
in the process of tow starting vehicles with
automatic transmission.
Vehicles with automatic transmission
#
must not be tow started.
Vehicles with automatic transmissions must
#
not be tow-started.
Electrical fuses
Notes on electrical fuses
& WARNING Risk of accident and injury due
to overloaded lines
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher amper-
age, the electric line could be overloaded.
Breakdown assistance 371
This could result in a fire.
Always replace faulty fuses with speci-
#
fied new fuses containing the correct
amperage.
* NOTE Damage due to incorrect fuses
Using incorrect fuses can result in damage to
electrical components or systems or their
functions being considerably restricted.
Use only fuses approved for Mercedes-
#
Benz with the respective specified fuse
rating.
Blown fuses must be replaced with fuses of the
same rating, which you can recognize by the color
and the label. The fuse ratings and further infor-
mation to be observed can be found in the fuse
assignment diagram.
Fuse assignment diagram: on the fuse box in the
trunk (
page 374).
/
Advertisement
Table of Contents
