Mercedes-Benz EQS 2021 Owner's Manual page 396

Comply with the manufacturer's safety notes on
the sticker on the tyre inflation compressor.
Have the tyre sealant bottle replaced in a quali‐
fied specialist workshop every five years.
Do not remove any foreign objects which
#
have entered the tyre.
Affix part 1 of the TIREFIT sticker to the
#
instrument cluster within the driver's field of
vision.
Affix part 2 of the TIREFIT sticker near the
#
valve on the wheel with the defective tyre.
Pull plug 4 with the cable and hose
#
of the tyre inflation compressor housing.
Push the plug of hose 5 into flange
#
tyre sealant bottle 1 until the plug engages.
Place tyre sealant bottle 1
#
into recess 2 of the tyre inflation compres‐
sor.
Remove the valve cap from valve
#
faulty tyre.
Screw filling hose
#
Insert plug
#
vehicle.
5 out
Switch on the vehicle.
#
Switch on the tyre inflation compressor using
#
6 of
On/Off switch 3.
The tyre is inflated. First, tyre sealant is pum‐
ped into the tyre. The pressure may briefly
head downwards
rise to approximately 500 kPa (5 bar/73 psi).
Do not switch off the tyre inflation compres‐
sor during this phase!
Breakdown assistance 393
7 on the
8 onto valve 7.
4 into a 12 V socket in your