Mercedes-Benz EQS 2021 Owner's Manual page 414

One of the following displays appears:
Current tyre pressure of each wheel:
R
Tyre pressures will be displayed after a few
R
minutes of driving
Tyre pressure monitor active: the teach-in
R
process of the system is not yet complete.
The tyre pressures are already being moni‐
tored.
Compare the current tyre pressure with the
#
recommended tyre pressure for the current
operating condition ( page 409). Addition‐
/
ally, observe the notes on cold tyres
( page 408).
/
% The values displayed in the driver's display
may deviate from those of the tyre pressure
gauge as they refer to sea level. At high ele‐
vations, the tyre pressure values indicated
by a tyre pressure gauge are higher than
those shown in the driver's display. In this
case, do not reduce the tyre pressure.
Bear in mind the following related topic:
Notes on tyre pressure (
/
R
Restarting the tyre pressure monitoring sys‐
tem
Requirements:
The recommended tyre pressure is correctly
R
set for the respective operating status on
each of the four wheels (
/
Restart the tyre pressure monitoring system in
the following situations:
The tyre pressure has changed.
R
The wheels or tyres have been changed or
R
newly fitted.
Driver's display:
©
4
Select
#
Swipe downwards on Touch Control on the
#
steering wheel.
The Use current tyre pressures as new refer-
ence values?
er's display.
page 408)
Select
#
a.
The Tyre pressure monitor restarted
sage is shown in the driver's display.
Current warning messages are deleted and
the yellow h warning lamp goes out.
After you have been driving for a few
page 408).
minutes, the system checks whether the cur‐
rent tyre pressures are within the specified
range. The current tyre pressures are then
accepted as reference values and monitored.
Bear in mind the following related topic:
Notes on tyre pressure (
R
Wheels and tyres 411
Service
5
Tyre pressure and confirm with a.
message is shown in the driv‐
Yes and confirm the restart with
mes‐
page 408)
/