Mercedes-Benz EQS 2021 Owner's Manual page 421

418 Wheels and tyres
* NOTE Damage to the vehicle due to
using an unsuitable jack
You can damage the vehicle and, in particular
the high-voltage battery, if you use a jack
that is not specifically designed for the jack
support points of the vehicle.
Only use jacks that are specifically
#
designed for the jack support points, or
use an appropriate adapter.
* NOTE Risk of damage to the vehicle due
to incorrect positioning of the jack
If you do not position the jack at the designa‐
ted jack support points, you could damage
your vehicle and, in particular, the high-volt‐
age battery.
Only position the jack at the designated
#
jack support points.
Take the ratchet out of the tyre-change tool
#
kit and place it on the hexagon nut of the
jack so that the letters "AUF" are visible.
Position support 2 of jack
#
port point 1.
Turn ratchet 3 clockwise until support
#
sits completely on jack support point
the base of the jack lies evenly on the
ground.
Turn ratchet 3 until the tyre is raised a max‐
#
imum of 3 cm from the ground.
Loosen and remove the wheel (
#
Removing a wheel
Requirements:
The vehicle is raised.
R
When changing a wheel, avoid applying any force
to the brake discs, as this could impair the level
of comfort when braking.
* NOTE Damage to threading from dirt on
wheel bolts
Do not place wheel bolts in sand or on
#
a dirty surface.
Unscrew the uppermost wheel bolt com‐
#
pletely.
4 on jack sup‐
2
1 and
page 418).
/