Control Panel Overview - Muratec MFX-1200 Operating Instructions Manual

Control Panel Overview

27
28
1
light Glows when the machine is in the Copy mode.
COPY
2
light Glows when the machine is in the Fax mode.
FAX
3
light Glows when a problem occurs during fax communication,
ALARM
printing or scanning. The light stays on until the machine prints a Check
Message report.
4
. light Glows when the machine is communicating with another
COMM
machine.
5
light Glows when the machine is receiving an incoming
MEMORY RECEIVE
fax document into its electronic memory.
6
Soft Keys Shortcut keys. Any function that can be turned on or off can be
programmed into these three keys. If the light above one of these keys glows,
this indicates the setting that s been programmed into it (see page 3.17) is
turned on. These keys are programmed at the factory to turn the following
functions on or off:
Soft key 1: Press to turn the confirmation report feature on or off
REPORT
for the next fax transmission.
Soft key 2:
MEMORY TRANSMISSION
fax machine uses, whether Memory transmission or Real time transmission
(see page 2.3).
1 2 3 4 5
26 25 24 23
Selects which transmission mode your
6 7 8
22 21 20 19 18
Soft key 3:
MONITOR
it allows you to hear the call you re making. When using this feature, you can
only hear the communication taking place. You cannot be heard unless you
use a handset (optional). When sending a fax, this key also activates the call
request feature.
7
/
REDIAL PAUSE
also produces a special pause character which can be useful when dialing
long-distance numbers.
8
DIALING OPTIONS
bers (see page 3.1).
9
BROADCAST
more than one location).
10
Press this to set up a fax transmission to a call group, a set of fax
GROUP
numbers which will receive the same document in one fax operation.
11
ADVANCED FUNCTIONS
In Fax mode: Chooses from following several fax options delayed transmis-
sion, Polling, F-Code transmission, F-Code polling and Batch transmission.
Or, in Copy mode: Chooses from following copy options Nega/Posi copy,
Combine copy (only for MFX-1600) or Ultra copy (only for MFX-1600).
12
REVIEW COMMANDS
brief description of delayed commands.
9 10 11 12
17 16 15
/ Turns the monitor speaker off or on. When it s on,
CALL
Redials the last number you dialed. In certain operations, it
Press this to insert special symbols into telephone num-
Press to send a broadcast fax (sending the same document to
Press to review pending fax commands or to view a
Getting started
13 14
1.3