Muratec MFX-1200 Operating Instructions Manual page 104

Plain-paper digital fax/copier/printer
Hide thumbs Also See for MFX-1200:
Table of Contents

Advertisement

6
If you want security reception to begin now (and at this same time every day),
skip to step 8.
Otherwise, go on to step 7.
7
Use the numeric keypad to enter the time (use a 24-hour format) when secu-
rity reception should begin every day. Type over the numbers displayed.
Here, we ve entered 17:35:
Security Rx
Enter Ti m e :
17:35
To change a digit, press
to move to the left, or
the correct digit.
8
Press
to save the setting.
ENTER
Helpful tip: After setting for activating the security reception, you can assign the
security reception to the Soft key (see page 3.17) to turn it on and off.
Turning on the security reception by pressing a Soft key is not
effected the time setting you entered at step 7. It begins the security
reception immediately.
To turn the security reception on by pressing a soft key:
1
Program a Soft key for security reception. (See page 3.17.)
2
Press a Soft key that is assigned for security reception.
Enter Passcode :* * * *
3
Enter the protection passcode and then press
The
briefly shows following and the
LCD
security reception begins immediately.
** Sec. Rx Active **
Note: To turn the security reception off, see Printing from security
reception/Turning off security reception, next column.
to move right. Then enter
.
ENTER
of the Soft key will light and the
LED
Printing from security reception / Turning off security reception
When security reception is on, an incoming fax goes directly into your machine s
memory and the
light comes on. But the incoming fax message is
MEMORY RECEIVE
not printed.
To retrieve the faxes received during this security reception (and to return your
machine to normal reception until the next time):
1
Press Program key,
, 3, 0, 4,
D
If you using the Soft key, press the Soft key instead of this operation.
In which way, the
shows:
LCD
Security Rx Doc.
Enter Passcode :* * * *
2
Use the numeric keypad to enter the passcode. Here we ve entered 6296:
Security Rx Doc.
Enter Passcode :6296
3
Press
.
ENTER
If you ve entered the correct passcode, your fax machine will print all docu-
ments in its memory and then erase them. Then it will turn security
reception off until the next time you ve scheduled security reception or the
Soft key which programmed security reception is pressed.
If you using the Soft key, the
If you ve entered an incorrect passcode, your fax machine will refuse to
print, and security reception remains on.
Advanced features
ENTER
light of the Soft key will be off.
LED
3.51

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfx-1600

Table of Contents