Muratec MFX-1200 Operating Instructions Manual page 100

6
Press . The asks which list you want to program into the program-
ENTER LCD
mable one-touch:
P2:Machine Settings
← ← / → → /Enter
7
Press until the list you want appears.
8
Press .
ENTER
9
Press to return your machine to standby mode.
STOP
Programming a document storage operation
If you want to program a programmable one-touch key to store an F-Code polling
document, two things must be true:
The F-Code bulletin box must exist on your fax machine.
You must know the F-Code bulletin box s two-digit number (01-50) and name.
To program your programmable one-touch to store a regular polling document or
F-Code polling document:
1
Press Program key, , 3, 0, 1,
A
grammable one-touch number available:
Select Program No.
P2:No Number Stored
Note: If P2 appears on the
LCD
number for P1. You can see what you programmed into P1 by press-
ing , if you want. For example, if you set P1 for storing of the polling
document, you will see:
Select Program No.
P1:Polling Document
Press to go back to the programmable one-touch key you want to
enter.
Note: To erase a programmable one-touch key, see page 3.49.
2
Press the key that you want to program or change. Here, we ve selected P2.
Select Program No.
P2:No Number Stored
Note: If your previous command for this key was to store a document and
you want to keep this key programmed to store a document, use these
instructions to make changes. But if you want to assign this key to a
completely different operation (for a delayed transmission, for exam-
ple), then you first must erase the stored command before
programming the new one.
3
If you want to select a different programmable one-touch key than the one
that appears on the , press that key now.
LCD
4
Press . The asks which operation you want to program into the pro-
ENTER LCD
grammable one-touch:
Type :Communication
← ← / → → /Enter
Note: If changing a previously stored command, skip to step 7.
Advanced features
. The shows the first empty pro-
ENTER LCD
, it means that you have already entered a
3.47