Muratec MFX-1200 Operating Instructions Manual page 80

Relay box Receives documents, then relays them to other machines. The
machine that relays the document is called a hub . Your fax machine can either
send to a hub or it can be a hub.
4 elements of an F-Code box
Each F-Code box has the following four elements:
(1) F-Code box number (01-50)
(2) F-Code box name (up to 16 characters)
(3) F-Code sub-address (up to 20 characters - can include numbers and the * and #
characters only)
(4) . . Code (4 digits)
I D
You will choose the information for each of these elements, and enter it into your
machine. The following steps will walk you through entering and changing that
information.
To create or modify an F-Code box:
1
Keep pen and paper with you as you follow these steps. As you decide on a
sub-address and enter it into your machine, write it down. Remember to:
(1) write down which box goes with which sub-address, (2) write down any
passwords or . . codes you enter, (3) keep these printed records in a safe
I D
place.
2
Press Program key, , 4, 0, 1,
C
have a name entered for F-Code box 01, the
Select F-Code Box
01:No Number Stored
3
Use the numeric keypad to enter the two-digit number (01-50) of the F-Code
box you want to create or modify. Here, we ve entered 0, 3 and see either:
Select F-Code Box
03:No Number Stored
4
If want to select a different F-Code box than the one that appears on the
use the numeric keypad to enter the two-digit F-Code box number now.
5
Press . What you do next depends on whether you re creating or
ENTER
modifying the F-Code box:
If creating skip to step 7.
If modifying the asks you to enter the proper
LCD
03:Set F-Code Box
Enter I.D. Code:* * * *
. Depending on whether you already
ENTER
shows:
LCD
Select F-Code Box
or
01:NY Branch Office
Select F-Code Box
or
03:Muratec America
. . code. The
I D LCD
6
Use the numeric keypad to enter the 4-digit
address and not the
Note: If you enter an invalid
and aborts this operation.
7
The machine is now asking you to name this F-Code box. The
03:Box Name;Upper
_
If you do not want to enter or change this F-Code box s name, skip to step 9.
If you do want to enter or change this F-Code box s name, go on to step 8.
8
Enter the name by using the one-touch keys. (If necessary, review Entering
characters , page 1.12) An F-Code box s name can be up to 16 characters in
length.
9
Press to save the box s name and continue. The
ENTER
03:Sub-Address No.
_
The fax machine now asks for this F-Code box s sub-address. This is the
numerical identifier you must enter in order to communicate with any remote
F-Code compatible fax.
If you do not want to change an existing sub-address, skip to step 11.
10
Use the numeric keypad to enter the sub-address to identify this F-Code box.
The sub-address can be up to 20 characters in length and include any
combination of numbers and the * and # characters (but no other non-
numeric characters).
03:Sub-Address No.
654321_
Note: No other F-Code box in this machine can have the same sub-address
as the one you enter here.
,
LCD
11
Press to save the sub-address.
ENTER
Note: If you entered a sub-address already being used by another F-Code
box, the machine beeps and briefly displays:
03:Sub-Address No.
shows:
Sub-Address In Use
The machine now returns you to step 10. Please enter a different
number for your F-Code box s sub-address.
. . code (not the
I D
- password) and then press
ITU T ENTER
. . code, the fax machine rejects the attempt
I D
03:Box Name;Upper
or
Muratec America_
LCD
03:Sub-Address No.
or
123456_
Advanced features
- sub-
ITU T
.
shows:
LCD
shows:
3.27