Muratec MFX-1200 Operating Instructions Manual page 15

Getting started
13
Press to begin a fax transmission, reception or copying.
START
14
Stops the current operation and ejects a document from the ADF.
STOP
15
Use in copy mode only. Press to reset the copy settings to their
COPY RESET
defaults.
16
Numeric keypad Just like the numeric keys on a regular tone-dialing
phone. Use these to dial phone and fax numbers and to enter numbers when
you re setting up the machine.
17
In Fax mode:
/ Starts a speed-dialing operation, which you finish by
SPEED DIAL TEL INDEX
pushing three of the keys on the numeric keypad. Also displays one-touch and
speed-dial entries sorted alphanumerically, as in a telephone directory. (See
page 3.9.)
Or, in Copy mode:
Press to turn on or off the
ZOOM
When the light glows, you can set the copy reproduction ratio at 1%
ZOOM
steps by using or key.
When the light is not lit, you can choose one of several fixed copy repro-
ZOOM
duction ratio by using
18
Program key Any function can be started by first pressing this key and
then entering the function number.
19
Cursor Keys
Scrolls (moves) through features and command options as dis-
played on the .
LCD
20
It confirms user settings, begins operations and moves through com-
ENTER
mand levels.
21
Press to delete characters on the
CANCEL
have entered into the machine.
22
/
PAPER SIZE NEXT DOC
In Copy mode:
Selects the printout paper you want to use.
While scanning a document:
Press to tell your machine to scan one or more additional documents after the
current scanning ends.
23
Instructs the fax to scan letter-, legal or half-letter sized
DOCUMENT SIZE
documents when you use the FBS (flatbed scanner) glass.
24
Liquid crystal display (
see what you re programming into the machine. The display shows 2 lines, 20
characters per line. If the
1.4
light.
ZOOM
or key.
and cancel commands you
LCD
) Shows the machine s status and lets you
LCD
is blank, the machine is off.
LCD
25
Printer status lights Green lights indicate the acceptable paper sources.
Red light will glow if the printer problem (such as paper jam) occurred.
26
Press to adjust the contrast level.
CONTRAST
27
/
DOCUMENT RESOLUTION
In Fax mode: Press to toggle among the three resolution modes and grayscale.
Or, in Copy mode: Press to select the type of your document.
28
/ Press this key to toggle between Fax mode and Copy mode.
COPY FAX
29 30
fliptab A
29
Macro Keys Programming the Macro keys (
steps of the operation to a simple press of a key. You can teach the Macro
keys to carry out one of the several operations (see pages 3.18 3.20).
30
Programmable One-Touch Keys
you teach your machine an advanced multi-step function just once, then recall
the function at any time by pressing one of these keys.
31
One-Touch Keys The keys labeled 01-55 offer one-touch dialing conve-
nience. Also, you may use these keys to enter the characters when you are
setting up the machine.
31
fliptab B fliptab C
1 and 2) can reduce many
M M
The keys labeled P1 and P2, this lets