Muratec MFX-1200 Operating Instructions Manual page 72

6
Press the keys exactly as you operate the job you want to program into the
Macro key.
Note: You can program up to 60 steps. When it comes over 60 steps, your fax
machine asks if you register the operations you have entered. If you
want to register them, press
Note: If you want to cancel the operations you have set, press
,
MACRO PROGRAM STOP
Example 1: To program some operations for copy: Press
the copy mode, and set number of the copies, paper size, contrast, resolution,
reduction/enlargement rate and sort setting as you want.
Note: See Making copies (pages 2.12 2.18) for detail operations.
Example 2: To program the operations for printing the one-touch numbers
list: Press Program key, , 1, 0, 6,
E
7
If you programmed or
ENTER START
Otherwise, press
MACRO PROGRAM
8
If you want to start immediately after pressing the Macro key when you use
it, press . If not, press
ENTER CANCEL
Note: If you want to confirm the settings or operations in the Macro key
before you start it, press
Include Start/Enter?
Check Enter/Cancel
9
The now shows:
LCD
M2:Name ;Upper
_
The machine now asks you to name this job.
If you do not want to enter or change this job s name, skip to step 11.
10
Enter the name by using the one-touch keys. (If necessary, review Entering
characters , page 1.12) A job s name may be up to 130 characters in length.
11
Press to save the setting.
ENTER
. If not, press .
ENTER STOP
and then go back to step 1.
/ to change
COPY FAX
.
ENTER
into the operation, proceed to step 8.
and skip to step 9.
.
here.
CANCEL
M2: Name ;Upper
or
Delayed_
Copying with the Macro key
To copy using a Macro key:
1
Insert the document.
2
Press the Macro key in which you ve stored the copy command.
3
Press , if you have not registered
START
Printing lists using the Macro key
To print a list using a Macro key:
1
Press the Macro key in which is programmed for the printing lists.
2
Press , if you have not registered
ENTER
Storing fax documents with the Macro key
To store a fax document for either polling or F-Code polling using a Macro key:
1
Insert the document.
2
Press the Macro key which is programmed for the storing operation you
want to use.
3
Press , if you have not registered
ENTER
Fax dialing with the Macro key
To dial a fax call using a Macro key:
1
Insert the document.
2
Press the Macro key in which you ve stored the fax communication com-
mand.
3
Press , if you have not registered
START
Your fax will perform the operation now, or at whatever time you programmed.
If you programmed this key to delay its operation, the
** Reserved **
Jan 29 2000 17:17
If you programmed this key to perform the operation immediately after you press it,
the shows the number:
LCD
9-1-972-555-4335
A4 Normal
Advanced features
in the Macro key.
START
in the Macro key.
ENTER
in the Macro key.
ENTER
in the Macro key.
START
shows:
LCD
3.19