Muratec MFX-1200 Operating Instructions Manual page 84

7
Press .
ENTER
If you ve entered an incorrect
and returns to standby mode.
If you ve entered the correct .
I
Overwrite Doc. :Off
← ← / → → /Enter
If you choose:
On: Your bulletin box erases the currently stored document when a new
document is stored in it
Off: Your bulletin box keeps both the currently stored document and the new
document, up to 30 documents in each box.
8
Press or until the mode you want appears.
9
Press to save the setting. Your machine starts scanning the document
ENTER
into the selected bulletin box:
F-Code Doc. File: 1
A4 Mem 99%
Important: The file number (shown above as 1) tells you how many docu-
ments are in this bulletin box. Your machine numbers files 1-30.
You need to know the file s number to erase or print it.
Printing a document stored in a bulletin box
You can print a document stored in your machine s F-Code bulletin boxes without
erasing the document from memory.
To print a stored document:
1
Press Program key, , 3, 0, 2,
D
Select F-Code Box
01:Murata Machinery
2
Use the numeric keypad to enter the two-digit number (01-50) of the F-Code
bulletin box that stores the document you want to print. We ve entered 03:
Select F-Code Box
03:Muratec America
. . code, your fax machine rejects the attempt
I D
. code, the display shows:
D
The shows:
ENTER LCD
3
Press . The shows:
ENTER LCD
03:F-Code Document
Enter I.D. Code:* * * *
4
Use the numeric keypad to enter your F-Code box s four-digit
Here we ve entered 2345:
03:F-Code Document
Enter I.D. Code:2345
5
Press .
ENTER
If you ve entered an incorrect .
I D
and aborts this operation.
If you ve entered the correct . . code, the display shows:
I D
03:F-Code Document
F i l e N o . : _
6
Use the numeric keypad to enter the file number (1-30) of the document you
want to print. Here we ve entered 3.
03:F-Code Document
F i l e N o . : 3 _
Note: If you want to print all documents stored in the bulletin box, simply
enter 0 (zero).
7
Press .
ENTER
Your fax machine prints the chosen document(s), then returns to standby
mode.
Note: If the F-Code box is not storing any documents, the machine briefly
displays the following before returning to standby mode:
03:Select F-Code Box
No Document Stored
Advanced features
. . code.
I D
. code, your fax machine rejects the attempt
3.31