Muratec MFX-1200 Operating Instructions Manual page 90

4
Press . The asks which operation you want to program into the pro-
ENTER LCD
grammable one-touch:
Type :Communication
← ← / → → /Enter
Note: If changing a previously stored command, skip to step 7.
5
Press until Communication appears.
Type :Communication
← ← / → → /Enter
6
Press . The now shows either:
ENTER LCD
P2:Fax#/Advan.Func.
_
7
Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever codes your phone system requires. The number can
be up to 40 characters in length:
P2:Fax#/Advan.Func.
9-5550629_
Your display can show only 20 characters at a time. To view characters beyond
those 20, press to scroll to the left or
Important: Do not press
ENTER
8
Now, while you can still see the fax number on the
, . The
ADVANCED FUNCTIONS ENTER
Delayed
Enter Time: 11/20:30
9
Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, Do this at 5:05
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Delayed
Enter Time: 30/17:05
P2:Fax#/Advan.Func.
or
9-5558743_
to scroll to the right.
.
, press
LCD
shows:
LCD
on the 30th. )
PM
Option 2: Perform the command at a certain time each day you press the
key. (For example, Do this at 5:05
To select this option, use the numeric keypad to enter 0, 0 and
then the time the fax should perform the command:
Delayed
Enter Time: 00/17:05
10
Press , . The asks if you want to make additional settings for
ENTER ENTER LCD
this programmable one-touch number.
O p t i o n : O f f
← ← / → → /Enter
If you do not want to make additional settings, press
24.
If you do want to make additional settings, press
11
The asks which resolution you want to use for this programmable one-
LCD
touch number.
Resolution :------
← ← / → → /Enter
12
Press until the mode you want appears.
Note: For any of the following settings, choose ----- if you do not want to
specify the displayed setting for this programmable one-touch key.
13
Press . The asks you to select a contrast mode for each programma-
ENTER LCD
ble one-touch number.
C o n t r a s t : - - - - - - -
← ← / → → /Enter
14
Press until the mode you want appears.
15
Press . The asks if you want the memory transmission on or off
ENTER LCD
when using this programmable one-touch number.
Memory Tx :---
← ← / → → /Enter
16
Press until the mode you want appears.
Advanced features
today. )
PM
. Then skip to step
ENTER
and .
ENTER
3.37