Muratec MFX-1200 Operating Instructions Manual page 26

Level one function Level two function
B. User Settings 2.Fax Settings
3.Copy Settings
4.Printer Settings
C. Other Settings 1.Journal & Reports
2.Cover Page
*3: This option appears only if the optional NIC (network interface card) has been installed.
Level three function Summary of setting
03.# of Rings Number of rings before your machine answers.
04.Redial Number of times and interval for automatic fax redialing.
05.Dialing Pause Dialing pause length.
06.Memory Tx On/Off setting for Memory transmission.
07.Quick Memory Tx On/Off setting for Quick Memory transmission.
08.TTI Tx On/Off setting for sending your TTI.
09.ECM Mode On/Off setting for ECM mode.
10.Block Junk Fax Reject the fax reception from unauthorized incoming faxes.
11.Security Rx Keep all received fax messages in memory and after print them.
12.PIN Mode Prevent unauthorized long-distance calls.
13.Passcode Enter passcode for limiting polling access.
14.Rotate Rx
On/Off setting for Rotate Rx.
(for MFX-1600 only)
14.DRD (for MFX-1200) Set the ring pattern to use with phone company s Distinctive Ring
15.DRD (for MFX-1600) service.
01.Scan Parameters You can set the following settings for copying.
Primary document type
Primary contrast mode
02. Print parameter You can set the margin for copying.
03.Auto Reset Time Set the time (minutes) of resetting the copy parameters.
04.Copy Auto Set the default setting to Auto for one of the following:
Paper size Reduce/Enlarge ratio Document size
05.Copy Protect On/Off setting for Copy protection.
06.Sort Copy On/Off setting for Sorting copy
07.Nega/Posi On/Off setting to reverse copy of black and white areas.
08.Combine On/Off setting to combine.
(for MFX-1600 only)
01.TCP/IP* 3 Enter the IP Address, Subnet mask and Gate way address.
01.Journal Auto Print Print the Activity journal automatically after 100 transactions.
02.Journal Line Up Change the printing order of the activity journal.
03.Set Report Type Select TCR (Transmit Confirmation Report) or
RCR (Receive Confirmation Report).
01.Set Cover Page On/Off setting for sending the Cover page.
02.Enter Cover Page Enter your message for the cover page.
Getting started
Default setting Page
Two times 4.4
Two times
4.5
One minute
Two times 4.5
On 4.2
On 4.2
On 4.2
On 4.1
Off 3.54
Off 3.50
Off 3.52
3.16
Off 4.4
Off 3.24
Text 4.6
Normal
24 mm 4.6
3 minutes 4.7
Paper size 4.7
Off 2.18
On 2.16
Off 2.16, 4.7
Off 2.17, 4.7
4.11
Off 3.21
Off 3.22
TCR 3.22
Off 3.23
3.24
1.15