Special Copy Function - Muratec MFX-1200 Operating Instructions Manual

Basic operation
Adjust image contrast
Setting the contrast allows you to compensate for any excessive light or darkness, of
the document pages you are copying.
To change the contrast setting, press
A glowing indicates the machine is using the setting named
LED
by that .
LED
Note: To avoid confusing the Light and Dark settings, just
remember Light lightens and Dark darkens
keep it straight.
Sort copy setting
Default setting: On
Helpful tip: If you frequently turn this feature off and on, you can set a Soft key
(see page 3.17) to turn on or off by simply pressing that key.
1
Press Program key, , 3, 0, 6.
B
2
Press .
ENTER
The shows the current setting:
LCD
Sort Copy :On
/ /Enter
3
Press or until the setting you want appears.
In this example, we ve chosen Off.
Sort Copy :Off
/ /Enter
4
Press to save the setting.
ENTER
2.16
repeatedly.
CONTRAST
CONTRAST
t o

Special copy function

Negative/Positive (reversing black and white areas)
DARK If using this feature, the black and white areas of the original are reversed.
Note: You cannot combine this feature with Reduced or Enlarged copies.
NORMAL
Helpful tip: If you programmed a Soft key to turn on or off this feature, simply
pressing that key will turn on or off this feature.
LIGHT
1
Make sure the machine is in the Copy mode.
2
Place your original document in ADF face up, or on the FBS glass face down.
3
Enter the document size by pressing the
4
Press
ADVANCED FUNCTIONS
Nega/Posi
Note: This feature is Off for default setting. However, you can turn on it for
the default. (See page 4.7.)
5
Press or
In this example, we ve chosen On.
Nega/Posi
6
Press
ENTER
with following display:
Copy <Nega/Posi>
Ltr [ Ltr ] 100%
7
As needed, set the following:
Select document type and adjust image contrast
Enter the number of copies
8
Press
START
Note: To reset the copy parameter to default setting, press
Note: To stop the copying, press
DOCUMENT SIZE
, . The shows the current setting:
ENTER LCD
: O f f
/ /Enter
until the setting you want appears.
:On
/ /Enter
to save the setting. The machine returns to the standby mode
1
.
.
STOP
.
.
COPY RESET