Muratec MFX-1200 Operating Instructions Manual page 86

3
Press . The shows:
ENTER LCD
03:F-Code Document
Enter I.D. Code:* * * *
Note: If the F-Code security box is not storing any documents, the machine
briefly displays the following before returning to step 2:
03:Select F-Code Box
No Document Stored
4
Use the numeric keypad to enter your F-Code box s four-digit
Here we ve entered 2345:
03:F-Code Document
Enter I.D. Code:2345
5
Press .
ENTER
If you ve entered the correct
ments in the F-Code security box and then erases them.
If you ve entered an incorrect
tion and returns to standby mode.
Using a relay box
Once your fax machine receives a document via
Code relay boxes, it sends it to the other fax machines that you ve set up on your
relay box. (See Creating or Modifying an F-Code box , pages 3.26 3.27.)
If you set the Auto print mode to on when you created the relay box, your machine
will print the received document, then relay it to the other machine. Otherwise,
your machine will only relay it to the other machines, not print it. See If you chose
Relay, page 3.29 for more details on this setting.
Also, you can send (relay broadcast initiation) the document to another hub
machine s F-Code box and get that machine to relay it to others. See F-Code trans-
mission on pages 3.34 3.35 for more detail.
The hub performs a relay broadcast, and the machine which sends the original doc-
ument to the hub has performed a relay broadcast initiation.
. . code.
I D
. . code, your fax machine prints all docu-
I D
. . code, your fax machine aborts the opera-
I D
- sub-addressing to one of its F-
ITU T
Erasing an empty F-Code box
An F-Code box must be empty in order to erase it. (If you select an F-Code box in
these steps which is not empty, the machine beeps. If this happens, print all docu-
ments in that box before erasing it.)
To erase an empty F-Code box:
1
Press Program key, , 4, 0, 2,
C
Select F-Code Box
01:No Number Stored
2
Use the numeric keypad to enter the two-digit identifier number (01-50) of
the F-Code box you want to erase. Here, we ve entered 0, 3 and see:
Select F-Code Box
03:Muratec America
3
If you want to erase a different F-Code box than the one that appears on the
, enter the box number now.
LCD
4
Press . If the F-Code box is empty, the
ENTER
03:Erase F-Code Box
Enter I.D. Code:* * * *
Important: If you select an F-Code box which is not empty, the machine
beeps and, before returning to step 3, briefly displays:
Select F-Code Box
Box In Use
Print any documents received in the F-Code box, then repeat
this procedure from the beginning to erase the box.
Otherwise, select another F-Code box.
5
Use the numeric keypad to enter the four-digit
Here, we ve entered 2345:
03:Erase F-Code Box
Enter I.D. Code:2345
Advanced features
. The shows:
ENTER LCD
Select F-Code Box
or
01:Murata Machinery
shows:
LCD
. . code.
I D
3.33