Muratec MFX-1200 Operating Instructions Manual page 57

Advanced features
One-touch fax dialing
To dial a fax call using a one-touch number:
1
Place the the document in the
2
If you are using the glass, enter the document size by pressing the
FBS
.
DOCUMENT SIZE
3
Adjust resolution and contrast if necessary.
4
Press the one-touch key in which you ve stored the number.
What happens next depends on whether you specified memory transmission or
real time transmission:
If you specified Quick Memory transmission:
Your fax machine scans the first page of your document into memory, then dials
the other fax machine.
While dialing, your machine scans the other documents into memory.
The shows the Location
LCD
Plano Office
A4 Normal
Note: If the entry doesn t have a Location
When the other machine answers, your fax transmits the scanned document
directly from memory. (To review Quick memory transmission, see page 2.3.)
If you specified normal memory transmission:
Your fax machine scans your entire document into memory first, then dials the
other fax machine.
The shows the Location
LCD
Plano Office
A4 Normal
Note: If the entry doesn t have a Location
When the other machine answers, your fax transmits the document directly from
memory. (To review Memory transmission, see page 2.3.)
3.4
, or on the glass.
ADF FBS
and the document s width and resolution settings:
ID
, the number appears.
ID
and the document s width and resolution settings:
ID
, the number appears.
ID
If you specified real time transmission:
Your fax machine dials the other fax machine.
The shows the Location and the document s width and resolution settings:
LCD ID
Plano Office
A4 Normal
Note: If the entry doesn t have a Location
When the other machine answers, your fax feeds the document through its scan-
ner, transmitting as it goes. (To review Real time transmission, see page 2.3.)
One-touch phone dialing
To dial a phone call using a one-touch number, you must have an optional handset
attached to your machine. (Contact your authorized Muratec dealer to order an
optional handset.)
To make the call:
1
Obtain a dial tone by doing one of the following:
Lift the handset
Press / to use the monitor speaker
MONITOR CALL
2
Press the one-touch key in which you ve stored the number. As the machine
dials, it shows the number on the
* * Tel Mode **
9-555-2842_
Note: Remember that your fax machine s monitor speaker is not a speakerphone.
If you dialed by using the monitor speaker, pick up the handset to speak to
the person that answers.
Note: If the call fails, and you used
hang up.
, the number appears.
ID
:
LCD
/ to dial, press
MONITOR CALL MONITOR
/ to
CALL