Muratec MFX-1200 Operating Instructions Manual page 108

4
Depending on if you have already entered at least one number into the
blocked numbers list, the shows one of the following:
LCD
Enter Fax Number
01:_
5
If you want to modify an existing entry in the blocked numbers list, press
or until you see the number you want to modify.
o r
If you want to enter a new number in an already-started blocked numbers
list, press or until you find an empty position in the list.
Then press to enter or modify the blocked number.
ENTER
Note: To clear a number from the list, see Clearing a number from the
blocked numbers list, right column.
6
Use the numeric keypad to enter the last eight characters of a fax number you
want to block. For example, if you want to block a fax from someone with a
Subscriber of 972-555-3038, you should enter 5, 5, 5,
ID
3, 8:
Enter Fax Number
01:555-3038_
To change a specific digit, press
cursor is under the digit, then use the numeric keypad to enter the correct
number.
7
Press to save the setting. The
ENTER
numbers list.
If you do not want to enter or change a number for this slot, go on to step 8.
If you do want to enter or change a number for this slot, repeat steps 5 7.
8
Press . Your machine will return to standby mode.
STOP
Select BlockJunk No.
or
01:555-2971
DIALING OPTIONS
to move left or to move right until the
shows the next slot in the blocked
LCD
Clearing a number from the blocked numbers list
To clear a number from the list:
1
Press Program key,
If your Block Junk Fax setting is either Mode2 or Mode3, skip to step 3.
Block Junk Fax:Off
← ← / → → /Enter
2
Press or until you see your preference, Mode2 or Mode3.
Block Junk Fax:Mode2
← ← / → → /Enter
3
Press . The
ENTER
Select BlockJunk No.
01:555-2971
, 3, 0,
4
Press or until you see the number you want to clear.
5
Press to clear the number.
CANCEL
To clear another number from the blocked numbers list, repeat steps 4 5.
Otherwise, go on to step 6.
6
Press to return your machine to standby mode.
STOP
Printing a list of the blocked numbers
Forgot which number is stored in the blocked number list? Just print a list of the
blocked numbers.
To print a list of the blocked numbers, press Program key,
, 2, 1, 0, .
B ENTER
shows:
LCD
Advanced features
, 1, 1, 0, .
E ENTER
3.55