Changing The Copy Auto Reset Time; Setting Copy Auto; Setting Negative/Positive; Setting Combine - Muratec MFX-1200 Operating Instructions Manual

Changing the copy auto reset time

Default setting: 3 minutes.
The machine returns to its initial condition automatically after a certain period of
time. You can change this time from 1 to 10 minutes.
1
Press Program key, , 3, 0, 3,
B
Auto Reset Time
(01-10):03
2
Use the numeric keypad to enter the time you want for the copy auto reset.
Here, we ve chosen ten minutes.
Auto Reset Time
(01-10):10
Note: Enter a leading zero when entering a quantity less than 10.
3
Press to save the setting.
ENTER

Setting copy auto

Default setting: Auto is set for Recording paper size
The machine automatically selects the recording paper size according to the docu-
ment size and enlargement/reduction rate. You can change it to select the document
size or enlargement/reduction rate automatically, instead of the recording paper
size.
1
Press Program key, , 3, 0, 4,
B
you want to set to Auto:
Copy Auto:Paper Size
/ /Enter
2
Press or until the item you want appears. In this example, we ve chosen
Document size.
Copy Auto:Doc. Size
/ /Enter
3
Press to save the setting.
ENTER
.
ENTER
. The asks you to select the item
ENTER LCD

Setting Negative/Positive

Default setting: Off
If you frequently use the Negative/Positive (reversing black and white areas), you
can set it to on for default setting by following procedure.
1
Press Program key, , 3, 0, 7,
B
Nega/Posi :Off
/ /Enter
2
Press or until the setting you want appears.
In this example, we ve chosen On.
Nega/Posi :On
/ /Enter
3
Press to save the setting. The machine returns to the standby mode
ENTER
with following display:
Copy <Nega/Posi> 1
Ltr [ Ltr ] 100%

Setting combine

Default setting: Off
Note: This feature is available only for the MFX-1600 model.
If you frequently use the combine feature, you can set it to on for default setting by
following procedure.
1
Press Program key, , 3, 0, 8,
B
Combine :Off
/ /Enter
2
Press or until the setting you want appears.
In this example, we ve chosen On.
Combine :On
/ /Enter
3
Press to save the setting. The machine return to the standby mode
ENTER
with following display:
Copy <Combine> 1
Ltr [ Ltr ] 100%
Changing the default settings
.
ENTER
.
ENTER
4.7