Stacking Multiple Copies; Sorting Multiple Copies (Using Adf); Enlarged Or Reduced Copies - Muratec MFX-1200 Operating Instructions Manual

Stacking multiple copies

1
Press / to change to Copy mode.
COPY FAX
2
Turn the sort setting off. (See page 2.16.)
Note: The default setting of sorting is on.
3
Place your original document in ADF face up, or on the FBS glass face
down just as you would to send a fax.
4
Enter the document size by pressing the
5
Using the numeric keypad to enter the number of copies you want (up to 99).
6
As needed, set the following:
Select document type and adjust image contrast
Set copy reduction or enlargement ratio
Note: For details about each items, see Making copy settings, page 2.15.
7
Press .
START
Note: To stop the copying, press
STOP

Sorting multiple copies (using ADF)

Note: You cannot use the FBS glass for sorting multiple copies.
1
Press / to change to Copy mode.
COPY FAX
2
Make sure the sort setting is turned on. (See page 2.16.)
3
Place your original document in ADF face up, just as you would to send a
fax.
4
Enter the document size by pressing the
5
Using the numeric keypad to enter the number of copies you want (up to 99).
6
As needed, set the following:
Select document type and adjust image contrast
Set copy reduction ratio
Note: For details about each items, see Making the copy settings, page 2.15.
7
Press .
START
Note: To stop the copying, press
STOP
.
DOCUMENT SIZE
.
.
DOCUMENT SIZE
.

Enlarged or reduced copies

Your fax machine is capable of enlargement and reduction when copying.
Note: The copy enlargement and reduction rate setting is available only for copy-
ing, not for faxing.
Important: Copy enlargement is available only for copying using the
available for copying using the
1
Press / to change to Copy mode.
COPY FAX
2
Place your original document in ADF face up, or on the FBS glass face
down just as you would send a fax.
Note: If you want to enlarged copy, use
3
Enter the document size by pressing the
4
Choose an enlargement or reduction ratio using
You can reduce to 78%, 64 % or 50 % of the original size
O R
You can enlarge to 129% or 200 %
O R
Press to turn the
ZOOM ZOOM
or of the cursor key. You can enter the ratio between 50% and 200%.
O R
Directly enter any percentage between 50 % and 200 % by following proce-
dure.
1. Press #.
2. Using the numeric key to enter your desired ratio (50 to 200).
3. Press # again.
129%: Half-letter (5.5 8.5 )
78%: Legal (8.5 14 ) Letter (8.5
Helpful Tip: You can set the copy reduction or enlargement ratio to Auto .
(See Setting copy auto, page 4.7.) If the Auto is set and you
set the document size by pressing
automatically reduce or enlarge the original size (you entered)
to fit on the paper size you selected.
5
As needed, set the following:
Select document type and adjust image contrast
Enter the number of copies
6
Press .
START
Note: To reset the copy parameter to default setting, press
Note: To stop the copying, press
STOP
FBS
.
ADF
glass.
FBS
.
DOCUMENT SIZE
or of the cursor key.
light on, and adjust the ratio at 1% steps using
Letter (8.5 11 )
11 )
, the machine
DOCUMENT SIZE
COPY RESET
.
Basic operation
; it is not
.
2.13