Reviewing Or Canceling Commands - Muratec MFX-1200 Operating Instructions Manual

Basic operation

Reviewing or canceling commands

Your fax machine can store many jobs in its memory. And it keeps track of each
one by assigning it a command number, like C01.
Delayed commands, redial attempts and current fax transmissions are all stored in
your fax machine s memory and given a command number. Your machine can store
up to 99 delayed commands. It identifies each by a two-digit command number rang-
ing from 01 to 99.
The Review Commands function gives you the power to check on each job (or
command) in your machine s memory. It also lets you cancel a command if you
decide not to send the document.
To see your machine s stored commands or to cancel them:
1
Press
REVIEW COMMANDS
The shows the first command, indicated by its command number and
LCD
the phone number it will dial.
If a command is in progress, that will be the first command the
C01:5552009
/ / /Cancel
If there are no stored commands in your machine It beeps briefly
and displays No Command on the
Here, you see command 01, followed by the number it s set to dial. If the com-
mand is to send a broadcast, Broadcast appears instead of the phone
number. (See Broadcasting, page 3.10.)
If the command is to send a batch transmission, the
number (such as B01 ) rather than the command number. (See Batch trans-
mission, pages 3.12 3.14.)
If the command is for a Call group dialing, the group number (such as G01 )
appears instead of the phone number. (See Call group dialing, page 3.8.)
Note: If your machine is attempting to perform a command now, it appears
on the display.
2
Press or to scroll through currently stored commands.
3
If you want to cancel the command shown, press
C01:9-5552311
Check / / /Cancel
2.8
.
. It then returns to standby mode.
LCD
shows its batch box
LCD
. The
CANCEL
4
To go ahead with canceling the command, press
step 2 to view other delayed commands.
To keep this command but to continue reviewing stored commands, press
or . Go back to step 2.
To keep this command and stop reviewing commands, press
your machine to standby mode.
Note: See also Reviewing or canceling parts of a broadcast, below.
Reviewing or canceling parts of a broadcast
You also can review or cancel certain numbers within a broadcast:
1
Press
2
Press
shows:
Note: Stop this operation at any time by pressing
LCD
C01:Broadcast
3
If you want to cancel the command shown, press
If you want to review individual numbers within this broadcast, go on to
step 4 without pressing
4
To review individual numbers within this broadcast, press
to see the first number. The
9-5550388
5
Press
6
Press
If you want to cancel this number, also, repeat this step.
If you want to cancel a different number, go back to step 5.
If you want to go back to reviewing or canceling other command, press
shows:
LCD
If you don t want to cancel any more numbers, press
returns to standby mode.
.
REVIEW COMMANDS
or to scroll through currently stored broadcast command.
/ / /Cancel
.
CANCEL
shows:
LCD
/ / /Cancel
or until you find the number you want to cancel.
, . The next number will appear.
CANCEL CANCEL
again. Go back to
CANCEL
to return
STOP
.
STOP
, .
CANCEL CANCEL
(or )
BROADCAST
.
. The machine
STOP