Muratec MFX-1200 Operating Instructions Manual page 88

13
Press .
START
If in step 10 you chose an immediate transmission, your fax machine begins dialing.
If you chose a delayed command, the machine shows Reserved on the
ing that it has stored the command in memory and will complete it later.
F-Code polling
1
Press to switch the machine to Fax mode.
FAX
2
Press four times and then press
ADVANCED FUNCTIONS
Enter Sub-Address
_
3
Use the numeric keypad to enter the appropriate sub-address.
In this example, we ve entered 123456.
Enter Sub-Address
123456_
Note: If you make a mistake, press
enter the correct number.
4
Press . The shows:
ENTER LCD
Enter Password
_
Note: If this sub-address does not have a password, skip to step 6.
5
Use the numeric keypad to enter the password. In this example, we ve
entered 654321.
Enter Password
654321_
6
Press . The shows:
ENTER LCD
Enter Fax Number
_
7
Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad. Do not press
8
What you do now depends upon when you want the polling to begin.
To have it begin now, skip to step 11.
To delay it, go on to step 9.
, indicat-
LCD
.
ENTER
to erase the character, then
CANCEL
.
START
9
Press ,
ADVANCED FUNCTIONS ENTER
Delayed
Enter Time: 15/17:05
10
Use the numeric keypad to enter the day and time when the polling should
begin, then press .
ENTER
11
Press .
START
If in step 8 you chose an immediate polling, your fax machine begins dialing. If you
chose a delayed command, the machine shows Reserved on the
it has stored the command in memory and will complete it later.
Advanced features
. The shows:
LCD
, indicating that
LCD
3.35