Procedure job aid
Figure 209
A timing cable assembly NTHW75
Cables, 2-pair
tightly twisted
Terminal cover
retaining nut
Terminal
cover
78.74 cm (31 in.)
73.66 cm (29 in.)
Terminal cover
retaining nut
Wire-wrap
Pin identifier
designations
Passport 15000, 20000 Hardware Installation, Maintenance, and Upgrade
To alarm/BITS module
pin
for signal
Chapter 17 Hardware procedures 557
These shield pins
are attatched to
the wire stiffener
Cable pairs are to be routed
between the tip and ring pins.
Pairs are to remain twisted
throughout routing
Tip
Shield
Ring
Mounting
ear
9.14 cm
(3.6 in.)
PPT 3111 001 AA2
5.2S2