Nortel Passport 15000 Hardware Installation And Maintenance page 163

Figure 39
Task flow of NEBS 2000 frame installation
For procedure page
numbers, see
Task flow navigation
below
Vertical
Removing a vertical
frame from the pallet
Moving a frame
into its anchoring
position
Placing the NEBS
2000 frame onto
the footprint
Removing a
kickplate
Levelling the frame
or frame pair
Fastening adjacent
frames together
Installing extended cable
management brackets
(optional)
Installing high-density cable
management brackets
(optional)
Passport 15000, 20000 Hardware Installation, Maintenance, and Upgrade
Chapter 11 Initial switch hardware installations 163
NEBS 2000 frame installation
Is the frame on
the pallet vertical
or horizonal?
Removing the
packaging from a
Passport in a frame
Is the frame
to be joined to
another frame?
Yes
Is the other
Yes
frame already
anchored?
No
Fastening
adjacent frames
together
Anchoring the
NEBS 2000 frame
Horizontal
Removing a horizontal
frame from the pallet
Installing extended cable
No
management brackets
(optional)
Installing high-density cable
management brackets
(optional)
Moving a frame into its
anchoring position
Placing the NEBS 2000
frame onto the footprint
Removing a
kickplate
Levelling the frame or
frame pair
Installing a
End
kickplate
PP_TASK_1091
5.2S2