Nortel Passport 15000 Hardware Installation And Maintenance page 208

208 Chapter 14 Power-and-ground hardware of a Passport 15000 or 20000
Figure 53
Task flow of a power-and-ground cable assembly replacement
Power-and-
ground cable
assembly
replacement
PP_TASK_1076.ins
241-1501-240 5.2S2
Powering down
a BIM
Disconnecting
power input cables
from the BIP
Disconnecting
power input cables
from a terminal
block
Removing a
power-and-ground
cable assembly
Installing a power-
and-ground cable
assembly
Task flow navigation
The following references are listed alphabetically:
• "Checking power input cables to the BIP" (page 261)
• "Connecting a power input cable to a terminal block" (page 307)
• "Connecting power input cables to the BIP" (page 330)
• "Disconnecting a power input cable from a terminal block" (page 347)
• "Disconnecting power input cables from the BIP" (page 353)
• "Installing a power-and-ground cable assembly" (page 489)
• "Powering down a BIM" (page 645)
For procedure page
numbers, see
Task flow navigation
Powering up a
Passport 15000
or 20000
Checking power
input cables
to the BIP
Connecting a
power input cable
to a terminal block
Connecting power
input cables
to the BIP
below
End