Nortel Passport 15000 Hardware Installation And Maintenance page 162

162 Chapter 11 Initial switch hardware installations
NEBS 2000 frame installation task flow
241-1501-240 5.2S2
— how to mark the footprint on the floor
— power-and-ground requirements, and routing power-and-ground
cables to the Passport
— whether the enlarged frame footprint from adding doors to the frame
can be accommodated by the intended anchor position
• Ensure that there is enough space to add on all optional frame hardware
accessories as indicated by the task flows in "NEBS 2000 frame
accessories" (page 115). Adding the frame accessories can be done prior
to anchoring the frame or after anchoring the frame, whichever is easiest
when placing the frame beside other equipment.
This task flow shows the sequence of procedures you do to install a NEBS
2000 frame. To link to any procedure, go to "Task flow navigation"
(page 164).