Acx5448, Acx5448-D, And Acx5448-M Installation Overview - Juniper ACX5448-D Hardware Manual

ACX5448, ACX5448-D, and ACX5448-M Installation
Overview
You can mount ACX5400 routers:
Flush with the front of a 19-in. four-post rack. Use the standard mounting brackets provided with the
router for this configuration.
Recessed 2 in. (5 cm) from the front of a 19-in. four-post rack. Use the extension bracket provided in
the standard mounting kit for this configuration. Recessed mounting is primarily used in enclosed cabinets.
To install and connect an ACX5400 router:
1. Follow the instructions in
2. Determine how the device is to be mounted.
For instructions on flush or recessed mounting, see
on page 87.
3. Follow the instructions in:
a. "Connect Earth Ground to ACX5400 Routers" on page
b. "Connect AC Power to an ACX5400 Router" on page 98
Router" on page
c. Registering Products—Mandatory for Validating SLAs
4. "Perform Initial Software Configuration for the ACX5448, ACX5448-D, and ACX5448-M Routers" on
page 109.
"Unpack an ACX5400 Router" on page
102, as required.
86.
"Mount an ACX5400 Router in a Rack or Cabinet"
95.
or "Connect DC Power to an ACX5400
85