Installing The Fan - Juniper JA2500 Junos Space Hardware Manual

JA2500 Junos Space Appliance Hardware Guide

Installing the Fan

134
Figure 20: Removing a Fan
Pull the fan module out of the chassis.
4.
(Optional) Place the fan module in the antistatic bag or on the antistatic mat placed
5.
on a flat, stable surface.
To install a fan in a Junos Space appliance, do the following:
(Optional) Attach an electrostatic discharge (ESD) grounding strap to your bare wrist,
1.
and connect the strap to an external ESD point.
Remove the replacement fan module from its antistatic bag.
2.
Insert the replacement fan into the slot for the fan module, as shown in
3.
Figure 21 on page 135, until the latch locks and you hear a clicking sound.
Copyright © 2018, Juniper Networks, Inc.