[Pr. Pc41_Function Selection C-J (*Copj)] - Mitsubishi Electric MR-J5-G User Manual

[Pr. PC41_Function selection C-J (*COPJ)]

Initial value
00000000h
[Pr. PC41.0_[AL. 090.1 Homing incomplete] detection selection]
Initial value
0h
Enable or disable [AL. 090.1 Homing incomplete].
This function is enabled in the cyclic synchronous position mode.
When setting this servo parameter to "1" (disabled), set [Pr. PC29.5 [AL. 0E3 Absolute position counter warning] selection] to
"0" (disabled).
0: Enabled
1: Disabled
[Pr. PC41.3_Electromagnetic brake sequence output function selection]
Initial value
0h
When shifting the PDS state from the Operation enabled state to servo-off, select a state after transition which enables [Pr.
PC02 Electromagnetic brake sequence output]. The state changes to the one selected with this servo parameter after the
time set in [Pr. PC02] has passed.
0: Switched on
1: Switched on/Ready to switch on/Switch on disabled
When [Pr. PC46.2 Protection coordination multiple connections selection] is set to "1" (connect multiple MR-J5D_-_G_ to the
converter unit), setting this servo parameter to "1" triggers [AL. 037 Parameter error].
1 SERVO PARAMETER DETAILS
84
1.4 Extension setting servo parameters group ([Pr. PC_ _ ])
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Setting range
Refer to the text
Setting method
Each axis
Ver.
A5
Ver.
C0
Ver.
Refer to the relevant detail No.