[Pr. Pb47_Notch Shape Selection 3 (Nhq3)]; [Pr. Pb48_Machine Resonance Suppression Filter 4 (Nh4)] - Mitsubishi Electric MR-J5-G User Manual

[Pr. PB47_Notch shape selection 3 (NHQ3)]

Initial value
00000000h
Set forms of the machine resonance suppression filter 3.
[Pr. PB47.0_Machine resonance suppression filter 3 selection]
Initial value
0h
0: Disabled
1: Enabled
[Pr. PB47.1_Notch depth selection]
Initial value
0h
0: -40 dB
1: -14 dB
2: -8 dB
3: -4 dB
[Pr. PB47.2_Notch width selection]
Initial value
0h
0: α = 2
1: α = 3
2: α = 4
3: α = 5

[Pr. PB48_Machine resonance suppression filter 4 (NH4)]

Initial value
4500 [Hz]
Set the notch frequency of the machine resonance suppression filter 4.
When [Pr. PB49.0 Machine resonance suppression filter 4 selection] is set to "1" (enabled), set the notch frequency with this
servo parameter.
1 SERVO PARAMETER DETAILS
58
1.3 Gain/filter setting servo parameters group ([Pr. PB_ _ ])
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Setting range
Refer to the text
Setting range
Refer to the text
Setting range
10 to 9000
Setting method
Each axis
Ver.
A0
Ver.
A0
Ver.
A0
Setting method
Each axis
Ver.
Refer to the relevant detail No.
Ver.
A0